If you’re like most homeowners in Atlanta, your garage is an important part of your life. Not only do you use it to store your cars and tools, but it’s also a workspace and a place to hang out with friends. So, when your garage floor starts to show signs of wear and tear, it’s time to take action.
Moreover, many homeowners do not take proper care of their garage in the meantime. They allow damage to only get worse and find they have an almost non-functional garage on their hands. Luckily, there are some things you can do to prevent and repair these issues.
In this blog post, we’ll discuss how to repair spalled and pitted garage floors in Atlanta. We’ll also share some tips on how to keep your garage floor looking good for years to come. Please, continue reading to learn more.
Spalled Concrete
Spalled concrete is a type of damage that can occur to concrete surfaces. Furthermore, it is when the formation of small, raised bumps on the surface of the concrete occurs. Moreover, the expansion of water trapped within the concrete causes this formation. As the water expands, it puts pressure on the concrete, causing it to break and form bumps.
Additionally, freezing temperatures will cause concrete to spall. The water within the concrete freezes and expands, putting even more pressure on the concrete and causing it to break apart. While spalled concrete is not usually a structural concern, it can be unsightly and difficult to repair.
If you have spalled concrete on your property, it is important to repair it as soon as possible to prevent further damage.
Pitted Concrete
Pitted concrete is a type of surface damage that occurs when the concrete begins to delaminate or separate from the aggregate. Moreover, this damage can happen for a number of reasons, but the most common cause is improper curing. When you pour concrete, the water in the mix begins to evaporate, which can cause the concrete to shrink and pull away from the aggregate.
In addition, if the concrete experiences excessive heat or cold during the curing process, it can also cause the surface to pit. Once pitted concrete forms, it can be difficult to repair. The best way to prevent pitted concrete is to ensure that the concrete cures properly before use. In addition, regular maintenance and repair can help to extend the life of pitted concrete surfaces.
Repairing Pitted and Spalled Concrete
There are a few different methods to repair pitting, depending on the severity of the damage. For small pits, filling with an epoxy-based filler is often sufficient. For larger pits or areas of more significant damage, patching with new concrete may be necessary. In either case, cleaning and preparing the surface before beginning any repairs is essential. Once you apply the filler or patch, it should be allowed to cure for at least 24 hours before putting any weight on it.
By taking the time to repair pitted concrete, you can help prolong your pavement’s life and avoid costly future repairs. However, there is still the problem of spalling concrete.
Fortunately, repairing spalled concrete is relatively straightforward. First, remove any loose debris from the surface of the concrete. Once you remove these pieces, you’ll need to fill in any deeper craters with an appropriate repair material.
In most cases, a simple concrete mix will suffice. Furthermore, once you apply the material, you’ll need to smooth it out so that it blends in with the rest of the surface. Finally, you’ll need to apply a sealant to protect the repaired area from future damage.
While repair work usually goes to professionals, it’s generally something that any homeowner can do themselves.
Tips for Prevention
Both pitting and spalling can be caused by a number of factors, including freeze-thaw cycles, deicing chemicals, and poor drainage. Fortunately, there are a number of steps you can take to prevent these problems from occurring.
One is to use an air-entrained concrete mixture, which helps to resist freezing and thawing. Furthermore, another is to use a water-repellent sealer on the surface of the concrete. So, this water-repellent sealer will help to prevent moisture from seeping into the concrete, which can cause cracking and spalling. Finally, it is important to ensure that you repair any cracks or voids in the concrete promptly, as these can also lead to surface deterioration.
By taking these simple steps, you can help to keep your concrete looking its best for years to come.
BadAss Garage Floors Has the Best Concrete Coatings
BadAss Garage Floors will provide you with the best concrete coatings services you could ever ask for. As a family-owned and operated business, we strive to add value to our community through our services. And, we are always adding new members to our concrete family!
Additionally, BadAss Garage Floors offers patio coatings, pool deck coatings, concrete sealing/grinding, driveway coatings, and commercial coatings. Also, we service the areas of Atlanta, Alpharetta, Buford, Cumming, and Milton.
Get a Free Quote
No matter what type of concrete coating you choose, BadAss Garage Floors has the experience and expertise to get the job done right. We will work with you to find the best solution for your specific needs and budget. So, please don’t wait, get in touch with us today!
